The 9 Most Unanswered Questions about
Proper Installation of a Subwoofer in a Car
Life is not complete without music; it does not matter if you are relaxing on your couch, or doing some work with some background music, whether driving or stuck in the traffic mess, music is important in life. Since you have music in your car, it is not time to improve it with high tech subwoofers for the eventual experience. Checking out these subwoofers, and making a selection on what is suitable with your budget and needs now you can get it installed. You can go ahead and contract someone to do it for you, but you can also do it with these six simple steps.
You need some take, the amplifier, the amplifier kit, a subwoofer box, and these subwoofers. Ensure that the amp is compatible to the speakers and that these subwoofers box is specifically designed for the speakers. Make space for the power wire to pass by getting an opening through the firewall which can be done by going under the dash to ensure you get the power line ready. In almost all kits, the thickness of the power wire should be 8 to 0 mms. It is time to get a fuse near the connector that will go right in the battery and get one close the battery but do not connect it for now.
Now pull out the dash and the player head unit and using the tape, attach the remote wire with the RCA cable and adjoin it below the dash on the right side of the passenger to the player position. Now you can decide to connect the remote wire and the straight wire or the wiring harness to the wire corresponding from the player and now connect the RCA cables. At this point the wires have to be run back to the point where the mounting of the amp was done. Run the wires to the position where the amp will be placed. Wires should run down on the passenger side for safety.
Now lift the carpet near the amp and obtain a good metal space on the body of the car to the lay the wire. You may have to add some paint to get a strong position in case you don’t get a good position. Finally, these subwoofers can now be positioned in the car and the speaker wire connected to the amp. Now secure the speaker wire using a hose in the engine compartment and attach the battery cable to the positive side of the battery. Prior to reassembling, test these subwoofers and ensure everything is properly connected and if all is in order reassemble the dash and enjoy the fine tunes in your car.